Washing Machines Installation Guide

A quick guide on best practices for installing your Bosch home appliances

Installation methods and measurements may vary from model to model - check the installation manual or consult your contractor for more details.

Types of tap connection

Note: White tape is compulsory for all water connection faucet to prevent water leakage. Tape the white tape around the thread of the tap before connecting the connector.

1. ¾ inch Garden Tap

Step 1: Wrap white tape around the threading of the garden tap.

Step 2: Connect the inlet hose of the washing machine to the tap directly.

Step 3: Tighten the connection.

2. ¾ inch Modern Tap (Outer thread with detachable end piece)

Step 1: Remove bottom piece of the tap. Outer thread of the tap will be exposed.

Step 2: Tighten the screws evenly on all sides.

Step 3: Connect the inlet hose of the washing machine to the tap directly.

Step 4: Tighten the connection.

3. Modern Tap with 1/2 inch inner thread

Step 1: Remove bottom piece of the tap.

Step 2: Wrap the white tap around the threading of the BSH adapter. Adapter can be purchased from any hardware stores.

Step 3: Connect the adapter to the tap.

Step 4: Connect the inlet hose of the washing machine to the adapter.

4. Modern Tap with 1/2 inch outer thread

Step 1: Adjust the screws of the adapter such that the bottom of the tap fits into it and is leveled. Adapter can be purchased from any hardware stores.

Step 2: Tighten the screws evenly on all sides.

Step 3: Wrap white tap around the threading of the adapter.

Step 4: Connect the inlet hose of the washer to the adapter.