If your dishwasher is not filling with water, there are a few easy things you can do to resolve this issue. Below you’ll find some of the typical reasons for your dishwasher not filling, the parts involved, and some advice on how to fix the problem yourself.

1. Water supply

Check if the dishwasher water supply valve is switched on before proceeding. It is easy to forget to switch it on, especially after coming back from a holiday. Be sure to also inspect for any visible damage.

2. Kinked or blocked hose

Inspect the dishwasher supply hose and untwist any visible kinks or bends.

Step-by-step guide: How to check that there are no kinks in the supply hose.

The supply hose may be kinked.

Check that there are no kinks in the cold water fill hose and the waste water hose by pulling the appliance out slightly and untwisting any visable kinks or bends in these hoses.

Pull the appliance out slightly and untwist any visible kinks.

3. Low water pressure

Check the water pressure directly from the tap using a bucket. Approximately 10 litres of water per minute should flow out of the tap when fully open. Contact your fitter if the water pressure is too low.

Step-by-step guide: How to check the water pressure

Check the water pressure of the tap.

Close the water tap and remove the hose.

Put a bucket below the tap and turn off the water tap.

Approximately 10 liters of water per minute should come out.

If the water pressure is too low, please contact your plumber to check the water installation.

4. Filter blockage

If the filters in the water connection of the supply or AquaStop hose are blocked, make sure to clean the filter in the inlet hose.

Step-by-step guide: How to clean the inlet filter

Turn off the water tap.

Remove the hose from the water tap.

Clear the filter under running water.

Use a small brush to clean.

Connect the hose and check it for leaks.

The supply hose may be kinked.

Check that there are no kinks in the cold water fill hose and the waste water hose by pulling the appliance out slightly and untwisting any visable kinks or bends in these hoses.

Pull the appliance out slightly and untwist any visible kinks.

Links which might be interesting for you:

  • More info about troubleshooting for dishwashers:
    Overview page
  • User manuals for dishwashers:
    User manuals
  • Spare parts :
    Contact our Customer Service Consultant at 603 7950 9338
  • Cleaning and care products:
    Starter Kit
  • Fitting accessories and other products:
    Accessories
Get in touch

Customer Service Centre
D-G-50, Block Dahlia, 10 Boulevard,
Sprint Highway, PJU6A, 47400
Petaling Jaya, Selangor

Walk-in from Monday to Friday: 9am to 6pm (closed on Public Holidays)
To locate us:
For Waze, please search: Bosch Customer Service Centre
For Google map, please search: Bosch Service – Home Appliances

Customer Service Consultant
Phone: +603 7950 9338
Monday to Friday: 9am to 6pm
Saturday: 9am to 1pm
(closed on Public Holidays)

Help is on the way: arrange a Bosch technician visit.

If you experience any problems with your home appliance, you can arrange a visit from a Bosch service technician.

Instruction Manuals

Download our manuals to help you get a quick start to operate your appliance.

Locate the rating plate

Identify your appliance to find your E-Nr (model) and FD (producion) number. You need these for product registration and booking your repair service.